All the power of the iPhone camera at your fingertips!
With the incredibly capable camera that is your iPhone, and Codecam, the most simple, easy to use, yet very powerful app, you can enjoy the unlimited possiblities that the complete control over your iPhone's camera can provide!
- manual shutter speed, ISO. Lock your exposure by picking a new value, or by long pressing the automatically selected one. Long press again to go back to auto.
- manual white balance: temperature and tint. You can lock the current value just like the exposure, or pick the exact values. White balance presets are also available: Daylight, Cloudy, Shade, plus two Incandescent and Fluorescent presets.
- manual focus: switch between auto an manual focus by tapping the button, or by tapping an area on the image to focus on it. A slider to manually focus is also available.
- 3:2 overlay: swipe down to switch to the ratio all the professional cameras use, swipe up to go back to 4:3. This feature if for composition only, the image that will be recorded is the full 4:3 image the sensor provides.
- video zoom: you can zoom by pinching the image, up until the point where upscaling would occur. For 4K, you can override this behaviour to allow zooming until the 1080p crop. The approximate focal length for the given zoom is also shown on the screen (converted to the equivalent focal length of a Super 35 or Full Frame sensor).
- the same manual controls for shutter speed, ISO, white balance and focus as in photo mode. Smooth autofocus using Focus Pixels on the iPhone 6 and 6s is available.
- compressions supported: 15 Mbit, 25 Mbit, 50 Mbit, 75 Mbit, 100 Mbit in H.264 with selectable IPB or ALL-I modes, and MPJEG compression with a 9/10 (or 8/10 for 4K)) quality setting
(note: the displayed bitrate in MJPEG mode is an estimation of the maximum possible bitrate)
- frame rates supported: 1080p24, 1080p25, 1080p30
- additional frame rates supported by devices older than the iPhone 6: 720p50, 720p60
- additional frame rates supported by the iPhone 5s and the iPhone 6: 720p120
- additional frame rates supported by the iPhone 6: 1080p50, 1080p60, 720p240
- additional frame rates supported by the iPhone 6s: 1080p120, 2160p30, 2160p25, 2160p24
- video stabilisation is supported, you can switch between Off, Standard and Cinematic stabilization, depending on availability
- HDR video is supported only on the iPhone 6 and 6 Plus, switchable between Off and Auto
- show shutter angle instead of shutter speed
- cinematic 1:2.35 overlay: swipte down and up on the preview screen to switch between 16:9 and cinemascope. This feature if for composition only, the image that will be recorded is the full 16:9 frame.
- automatic save to camera roll: all images and supported videos are saved to the camera roll
- gallery mode: You can see the images and videos you took in a grid or loupe view, with full metadata. You can also share them, or delete them right in the app.
- added support for iPhone 7 and 7 plus
(dual camera and raw photo capture will be available in an upcoming update)